Pattern Question

[Keith Denman]

Hi Ken:
This is the Frier Tuck pattern with my modification. Something just is not there. Would you be so kind as to look at it and allow me your brillance?
https://lh4.googleusercontent.com/-OfNZSuwyWeU/Tm_3cW6P6lI/AAAAAAAAAV4/aNi-FE7u10M/s512/ftath.jpg
Hood from original open back design
https://lh5.googleusercontent.com/-7S9YGvqLLOM/Tk2yI1vocsI/AAAAAAAAAF8/zxGXw0lIS6c/s512/friertuck2%252520016th.jpg

[gos'n]

Hard to see the result.

[Keith Denman]

Hi John:
Yeah the photo of the hood is not the best. I originally designed it a little different than the pic shows. The hood in the photo is the Frier Tuck 2 series open back. I am trying to modify my pattern to make it a accordian back. I like to create different type of hoods.

[Keith Denman]

Never mind Ken pattern is no good the way I drew it back to the drawing board.

[sakerjack]

Never mind Ken pattern is no good the way I drew it back to the drawing board.

I am leaving out of town when I get back I will e-mail you a couple of ideas for a Friar hood with accordion braces..

[Keith Denman]

Have a safe trip.

[Keith Denman]

Hi Ken:
On the Chinook blocks when doing the acordian back should it fit tight all the way around the block are should the back be loose and not fit against the block?

[sakerjack]

Hi Ken:
On the Chinook blocks when doing the acordian back should it fit tight all the way around the block are should the back be loose and not fit against the block?

Loose KD

[sakerjack]

Hi Ken:
On the Chinook blocks when doing the acordian back should it fit tight all the way around the block are should the back be loose and not fit against the block?

Sorry I meant to go back and edit my last post but had trouble connecting..I think it would depend on the pattern of course. The patterns I use on the blocks the back fits loose. Sorry if I confused you.

[Keith Denman]

Hi Ken:
Here is how I changed my pattern. I think it is to loose and maybe does not go down in the back far enough. It should be a 27 or 28 block. I am going to try and make it using tooling calf for the front and white kangaroo for the back.
https://lh6.googleusercontent.com/-C-1QySRN5k0/ToJLhhzh7HI/AAAAAAAAAYQ/DzUiManosP8/s720/fta%252520001.JPG