PDA

View Full Version : Pole Perches



roscogruen
03-13-2015, 01:28 AM
three pole perches as shown in this link: http://www.filebin.ca/1ue9sP3emlS5/20150312_215917.jpg

asking $150. this is probably less than the material cost. pm or call with questions: 806-236-0374.

roscogruen
03-13-2015, 01:36 AM
three pole perches as shown in this link: http://www.filebin.ca/1ue9sP3emlS5/20150312_215917.jpg

asking $150. this is probably less than the material cost. pm or call with questions: 806-236-0374.

block tops are red wood. the bottom of the area where the perch material sets is about 1/8" to 1/4" wider than the top. they have at least five coats of water based polyurethane. the perch material is affixed to the block top using heavy duty velcro. the eye bolt is a bolt with a lock washer not an eye screw.

the bases are over a half inch thick. the pipe is 1/2" steel pipe. 1/2" flanges are used at top and bottom.

they are home jobs but if your bird will set on them they work great.

shipping or pick-up.

roscogruen
03-13-2015, 01:40 AM
three pole perches as shown in this link: http://www.filebin.ca/1ue9sP3emlS5/20150312_215917.jpg

asking $150. this is probably less than the material cost. pm or call with questions: 806-236-0374.

block tops are red wood. the bottom of the area where the perch material sets is about 1/8" to 1/4" wider than the top. they have at least five coats of water based polyurethane. the perch material is affixed to the block top using heavy duty velcro. the eye bolt is a bolt with a lock washer not an eye screw. close-up: http://www.filebin.ca/1ueDvQVFn3ec/20150312_215939.jpg
(http://www.filebin.ca/1ueDvQVFn3ec/20150312_215939.jpg)
the bases are over a half inch thick. the pipe is 1/2" steel pipe. 1/2" flanges are used at top and bottom.

they are home jobs but if your bird will set on them they work great.

shipping or pick-up.

roscogruen
03-14-2015, 06:23 PM
$150 each

roscogruen
04-19-2015, 05:56 PM
the bottom flange up for $180, shipping included but only within the US.

the bottom board will cost ~$300 due to shipping through UPS. $20 bucks for the board and $180 shipping.

pickup in amarillo is $150.