Printable View
Many may be interested in having a way to turn transmitters on and off without having to go get their receiver out in order to listen to the transmitter.
This can now be easily done in one step with a new little Accessory item added today to the Marshall Radio website called the "Signal Sensor."
It's explained here.
RB
Would it work well for a cast of HHs? since all the birds will be in the back of the vehicle or very nearby when I'm turning transmitters on and off? I guess what I mean is HOW close do you have to be? If I have one transmitter on already will I be able to tell if the others are on/off as well?Quote:
Originally Posted by RLBagley
Why is the price in british pounds? It says it's under American falconry.......
Good point. Each section of the site has a little link embedded in the price of each item to a monetary calculator for the local currency.Quote:
Originally Posted by frootdog
So, it should be showing $39.95 (and it will shortly).
Sorry,
RB
Good I don't speak British. Wish I had know about this a week ago......Quote:
Originally Posted by RLBagley
Yes, you need to be within just a few feet to sense the signal, and then within an inch or in direct contact with the transmitter to turn it off (or back on). When I slowly pulled it away from a running RT+ transmitter just now, it stops beeping at about three feet away.Quote:
Originally Posted by frootdog
RB
Quote:
Originally Posted by RLBagley
Thanks.:D
Oops. What happened a week ago?Quote:
Originally Posted by frootdog
I spent a lot of money with Marshall. Would have thrown that in too. I hate flipping through the dial to make sure all the transmitters are on and then off at the end of the hunt. 3 birds + 1 dog all with Marshall transmitters. I will order one for sure before the season gets underway.Quote:
Originally Posted by RLBagley
(check for a Private Message)Quote:
Originally Posted by frootdog
Hi Krys,Quote:
Originally Posted by frootdog
I'm with you there. What a wonderfully practical piece of equipment. Maybe I'll have the one in british pounds?;-)
Very good Robert. I promise I'll be using one when you join us!
Best wishes,
Tony.
It's a very practical little gadget. I have something similar that came from Northwoods and just love it. I think yours is a bit less expensive. If I didn't already have one, I'd definitely be looking at yours.
Yes, the black box type (shown below) is $89 from Northwoods, and $68 from Mike's Falconry Supplies, whereas the Signal Sensor is only $40 (well, $39.95). Not sure if the WMI blue box versions are still available.Quote:
Originally Posted by Joby
And it's also available from Western Sporting and Northwoods for that price.
http://i883.photobucket.com/albums/a...s/Allthree.jpg
Here it is shown being used with a Marshall Pointing Dog tracking Collar, with both LED's lit up at the same instant:
http://i883.photobucket.com/albums/a...arsm-clean.jpg
Does the marshall one have the speaker in it too for an audiable signal?
Quote:
Originally Posted by RLBagley
That big blue link will answer that..... or here you goQuote:
Originally Posted by dirthawking
Features
• Durable weather-resistant case.
• Magnet for turning transmitter ON and OFF.
• Push button operation prevents battery drain when not in use.
• Microprocessor-controlled signal detection algorithm.
• LED & Tone indicators signal that transmitter is operational.
• LED & Tone indicators signal that tester battery is functioning.
• Lanyard attachment point to prevent loss in the field.
$39.95
Quote:
Originally Posted by RLBagley
To add to Robert's answer, also remember that the sensing distance will vary depending on the transmitter. For example a Powermax has 3db more (2x) transmit power than the RT+ while the Scout has 3db less (per Marshall's relative power table).
You can also achieve some directionality by shielding the Signal Sensor with your other hand if you are trying to determine which bird in your hawking rig still has its transmitter turned on.
By the way, as a message to others here on the Forum, if you'll notice in the description of this little device on our webpage, it's Ron here who is credited as the designer/creator of the Signal Sensor, also named the Signal Finder when purchased through Western Sporting.Quote:
Originally Posted by rkumetz
So, his observations here are to be listened to closely. . . .
Kudos and thanks again for getting this done.
RB
might have to invest in one of these for the weathering yard. Beats walking around with a reciever looking for live trannies
!!!!!!!!!!!! Just go to Trinidad, CO. Glad you specified that you are looking for live ones Rich. I would have been worried otherwise.Quote:
Originally Posted by Lowachi
Quote:
Originally Posted by Lowachi
I wonder what frequency they are on? toungeoutQuote:
Originally Posted by frootdog
Do the dead ones have a different frequency as opposed to the live ones? Come on Rich don't leave us hangin'. Inquiring minds want to know? (Isn't that kinda an oxymoron? I mean don't Inquiring minds by definition WANT to know?)Quote:
Originally Posted by dirthawking
Quote:
Originally Posted by Lowachi
I am still baffled as to why you have to weather one.Quote:
Originally Posted by frootdog
If you weather em too much then you have to do things like this.....Quote:
Originally Posted by dirthawking
http://www.youtube.com/watch?v=RQb2m6VJ-eo
Quote:
Originally Posted by frootdog
Krys,i asked Guy..he said mind your own buiseness:D:D:D:D
ah, now I see.....Glad I'm being retired. This kinda abuse is for the young...or Texansmooon...and I've been to Trinidad, I was looking for you.photoo. As the sayinng goes..."Friends!! I have a multitude of friends!" Lucky me.
I'd still like to get one, but if I'm being replaced, I don't think I want to buy one and send it down the road with all the rest of the gear I've acquired for the club, sorry. But who knows, it might be a nice parting gesture for whomever takes over if he/'she(politically correct always) doesn't have a multi frequency receiver of their own.