Here is the text with Sampo's contact information:

Sampo Inc.
119 Remsen Road
P.O. Box 328
Barneveld, NY 13304
tel (315) 896-2606
fax (315) 896-6575

e-mail: info@sampoinc.com

I've been using Sampo swivels since 1974 for falconry applications. On the most recent swivels I've purchased. I've noticed a small change in the clip on the Coastlock #8 and other swivels (#6) that has make my falconry uses much more difficult. It is where the wire wrap ends at the swivel. Instead of being on the outside of the opening end of the swivel, it is on the inside where cord or line is threaded onto the swivel.

As a falconer, I use para cord jesses. This end snags on my para cord jesses when removing or attaching the jesses. Not a good thing. I also work with some raptorial birds that have difficult personalties. The snagging of the cord from the wire end when changing equipment and hinders a smooth transfer to field equipment. I have some older Sampo swivels that do not have this issue, because the wire ends on the OUTSIDE of the clip. They work much better and are easier to operate.

A simple adjustment in your manufacturing process would eliminate this problem altogether. Just have the wire wrapped on the other side of the swivel opening, like it was with older Sampo swivels.

In the photo attached, the copper colored swivel is the newer version where the wire ends inside. It snags on the paracord jesses I use and is a problem.

The black swivel at the top of the photo is an older version of the swivel and you will see that the wire ends on the outside/opposite side of the swivel opening. Making it much easier to use.

Thank you for looking into this matter.

Sincerely,

Karen ‘Kitty’ Carroll

Karen ‘Kitty’ Carroll